Thursday, April 18, 2013

ESA Aeolus /WIND Mission Back on Track: 90 Million laser bursts

Developing new ways of monitoring Earth is always demanding, but ESA's Aeolus mission has faced some particularly difficult technical challenges.

However, with the success of intense high-energy tests on its novel laser there is now light at the end of the tunnel for this unique mission.

The Aeolus satellite will carry a single, but complex, instrument that will probe the atmosphere to profile the world's winds.

Reliable and timely wind profiles are urgently needed by meteorologists to improve weather forecasts. In the long term, they will also contribute to climate research.

Aeolus carries a pioneering instrument called Aladin that uses laser light scattering and the Doppler effect to gather data on wind.

The laser generates high-energy UV light, which is beamed towards Earth through a telescope.

As the light travels down through the atmosphere, it bounces off molecules of gas, particles of dust and droplets of water.

This scatters some of the light in all directions, including back to the satellite where it is recorded by Aladin.
ESA's wind mission.

By comparing the shift in frequency of the received light from the transmitted light caused by the Doppler effect, the motion of the molecules in the atmosphere can be measured, revealing wind velocity.

The laser transmitter is being developed by Selex-ES in Italy.

It has been a very long and difficult undertaking – forging new technologies in many areas such as optics, opto-electronics, precision mechanics and thermo-mechanical design. Recent tests show all this effort has not been in vain.

"The environment in space, the high laser power and the number of laser shots that the UV optics will have to withstand over the life of the mission all mean that the Aladin UV optics had to be pushed beyond the state of the art."

Didier Morancais, project manager for the Aladin instrument at EADS Astrium-SAS, adds, "This project has been on the brink of technology from the start. These positive results, together with added design margins within the laser and the instrument, are encouraging and paves the way towards a qualification of the first UV space laser." Improvements to the laser resistance of the optical coatings had to be specially developed.

No comments:

Post a Comment